Operator`s Manual
–
Electric Winch
10
2018-08-03, rev 1
Electrical Connections
WARNING
If the motor rotation is reversed some options (like the limit switches)
will not function properly which may lead to injury or equipment damage.
All electric connections must be performed by a qualified electrician. Do
not neglect to verify the current draw and the length of the power cable.
Improper connections or conductor sizing may cause the winch to overheat even
with no load.
The winch must be connected to the power source such that the motions
correspond to the indications on the control pendant, in other words the IN
button makes the wire rope wind on the drum where as the OUT button unwinds
the wire rope. The connection procedure steps are illustrated on the next page.
