Vulcan-Hart NOVA JCD 1T, Руководство оператора

Страница: 3 / 8

3
Safety and Warnings
Dangerous Practices to be Avoided
DO NOT use the clamp before reading the manual
DO NOT let an unqualified person use or repair the clamp
DO NOT exceed the rated capacity of the plate clamp
DO NOT user damaged or malfunctioning plate clamp
DO NOT lift people nor carry loads over people
DO NOT stay in the “fall zone” when lifting the plate
DO NOT lift load if clamping jaws are not fully engaged
DO NOT lift unbalanced loads
DO NOT leave the load supported by the clamp unattended
DO NOT lift more than one plate at a time
DO NOT use the clamp on thinner plates than the minimum
specified thickness
DO NOT use the clamp on thicker plates than the maximum
specified thickness
DO NOT use the clamp on plates with surface hardness
higher than 30 HRC / 300 Brinell
DO NOT do not lift loads lower than 20% of the rated
capacity (do not underload the plate clamp)
DO NOT shock load
DO NOT allow a welding electrode to touch the plate clamp
DO NOT use the clamp as ground for welding
DO NOT remove or obscure labels
DO NOT use if nameplate or safety and warning labels are
missing or illegible
WARNING
Use only Vulcan authorized replacement parts in the
service and maintenance of this equipment. Failure to comply with
the above limitations may result in property damage, injury or
death.