1.
Remove the screws which secure the left side of
the top front cover, bottom front cover and control
panel.
2.
Remove the seven screws securing the left side
panel.
Fig. 5
3.
Pull the left side panel out at the bottom then
down to remove.
4.
Reverse the procedure to install.
CONTROL PANEL COMPONENTS
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
There may be multiple circuits. Be sure
all circuits are disconnected.
Removable Components
1.
Remove the control panel as outlined under
COVERS AND PANELS.
2.
Remove the component being replaced.
3.
Reverse the procedure to install the replacement
component, then check oven for proper
operation
Fig. 6
VC4E & VC6E Series Full Size Electric Convection Ovens - REMOVAL AND REPLACEMENT OF PARTS
F25105 Rev. B (0217)
Page 8 of 64