Fig. 40
4.
Reverse the procedure to install.
DOOR ADJUSTMENT
1.
Check the doors to make sure they have an equal
gap between them and that the vertical edge of
the door is parallel to the vertical door seal. If the
doors are not positioned in this manner, adjust
the doors as described.
Fig. 41
2.
Remove the top front cover.
3.
Loosen the screws that secure the upper door
bearings and related hardware, just enough to
allow door movement.
Fig. 42
VC4E & VC6E Series Full Size Electric Convection Ovens - SERVICE PROCEDURES AND ADJUSTMENTS
F25105 Rev. B (0217)
Page 26 of 64
