REMOVAL AND REPLACEMENT OF PARTS
REMOVAL AND REPLACEMENT OF PARTS
COVERS AND PANELS
Front Panel
1.
Turn all thermostats to off position, loosen set
screw securing thermostat knobs and pull off
knobs.
2.
Remove screws securing front panel to griddle.
3.
Pull front panel forward and lay aside. If
servicing a 900RX lay front panel face down in
front of unit.
4.
Install in reverse order.
NOTE:
Before installing front panel, check that line-
of-sight through the front panel to see both pilot
burners and griddle burners. Move any flexible gas
tubing, or capillary tubing that may obstruct the sight
holes.
Back Panel
NOTE:
It will be necessary to remove the back panel
when changing a burner or to remove excessive
grease build up from flue area.
1.
Disconnect gas supply at griddle.
2.
Remove screws securing back panel to griddle.
3.
Install in reverse order.
MOMENTARY POWER SWITCH
(900RX)
1.
Remove FRONT PANEL.
2.
Label and disconnect wires from power switch.
3.
Squeeze switch retainers and slide switch out
through front of panel.
4.
Install in reverse order.
NOT IN OFF POSITION FOR VIEW
F25383 (510)
Page 5 of 16
