vufold INTU Micro, Инструкция по монтажу

Страница: 4 / 8

7.
Place the bottom corner bracket into the bottom
right slot on the bracket fitting tool.
8.
Position bracket behind the rubber seal at the bottom
right corner of the frame. Carefully push until the metal
leg is behind the rubber seal. Check the bracket is square
to the sides of the frame and fully secure.
6. Position bracket behind the rubber seal at the
bottom right corner of the frame. Carefully push until
the metal leg is behind the rubber seal. Check the
bracket is square to the sides of the frame and fully
secure.
5. Place the bottom corner bracket into the bottom left
slot on the bracket fitting tool.
9. Place the flat side of the side extrusion against the
glass with the notch to the bottom.
10. Slide the side extrusion up until its slots into the
top corner fixing bracket. The side extrusion should
rest under the bracket. Push the slot at the base of the
extrusion over the bottom corner bracket. Repeat for
both sides.