VU 43S6535, Руководство пользователя

Страница: 10 / 32

The unit uses a RF remote control. When the unit is turned on for the first time and if
code pairing is not
performed for the TV set, the screen will pop up the code pairing
prompt for the remote control.
Please follow the following methods to perform code pairing operations.
Remote Control
When the TV set is turned on, simultaneously
remote control for
over one second, and the red
indicator will flash fast, and
the remote control
will enter into the code pairing mode,
and then
put the remote control near the right speaker on
the back of the TV set as close as possible, and
the red
indicator will remain on and then go out,
and then the TV
screen will display a prompt box
“Match Code tips”,
indicating that the code pairing
is successful. Then you
can use the remote control
to conveniently operate the
TV set. In case that the
code pairing fails, please repeat
the code pairing
operations.
the
remote control.
This manual mainly focuses on the operations of
•
The figures are for reference only, and for the specific appearance and model, the
actual ones shall
govern.
•
and the
button on the
press the
MENU
The buttons of the original remote control are as following:
1.
MIC: Microphone hole on the remote control (Note: Do not block this hole)
2
. Indicators on the remote control:
1. The red indicator flashes slowly: It indicates that the code pairing is not
performed for the remote
control or the receiving terminal is not within the scope.
2. The red indicator flashes fast: It indicates that code pairing is being performed for
the remote
control.
3. The red indicator remains on: It indicates that the voice function is enabled.
4. The green indicator remains on: It indicates that the motion sensing function is
enabled.
3
.
: Power, switch on or off TV set.
button
5
. : P ress the button to turn on the voice function, and the red indicator on the remote
control will go on,and the microphone will be turned on; follow the prompt of the umit
to input voice ,and to input for many times,press the button repeatedly.
The Voice Control function only supports the Xbrowser , and the MIC function
could support Third-Party voice chat software .
: Accesses the main scene interface. 4.
8