VTRACKPRO FPRO300, Руководство пользователя

Страница: 6 / 102

5
WARNING
Failure to follow these safety instructions could result in fire,
electric shock, or other injuries, or damage to product or other
property. Read all the safety information below before using
product.
* Do not disassemble or modify s product under user's own dis-
cretion, or it may cause product failure, electric shock or fire.
* When terminal is in malfunction, do not operate terminal.
* If foreign matter or water gets into terminal or smoking, stop
using and contact service center for A/S.
* When other electronic product is installed in vehicle, be care-
ful that terminal power cable is cut or gets damaged, or it may
cause product failure or electric shock or fire.
* Do not change the terminal installation location without authori-
zation, or there may be blind area in image photography and
user shall be liable on this.
* Fuse shall be in rated capacity.
* Unauthorized installation may cause failure in vehicle or prod-
uct.
* When power is connected, do not remove memory card,
cause memory card failure.
* Do not touch memory card with oily or wet hand, or it may
cause product failure.
* Please use only authenticated and recommended memory
card, or it may cause data loss.
* Do not put foreign material into card insertion slot of the termi-
nal, or card may not be inserted or it may cause product fail-
ure.
* An improper connection could result in loss of data or memory
card defect.
* For cleaning, do not use water, benzene or alcohol to product
and parts. Please use soft and dry cloth, or it may cause prod-
uct failure.
* Do not apply strong impact to the terminal, or terminal may
break by the impact or it may cause product failure.
* GPS receiver module requires warming up time for initial start
up. It may take several seconds or several minutes after
power is turned on according to signal receiving environment.
Section 1
Important safety information