VTech VT9041, Руководство пользователя

Страница: 27 / 29

23
10
9
If you have difficulty with your phone, please try the suggestions listed below.
Problem Cause Solutions
No dialing tone when pressing
<TALK ON> key
a. The connection cord of the
base station is not plugged
in.
b. The adapter cord is not
plugged in correctly in the
base station.
c. The line is busy, as another
handset is used.
d. Wrong connection cord (no
Euro AS)
a. Check the connections.
Unplug and plug back in the
mains. Check that the
telephone line cord has
been plugged into the base
station and the phone
socket.
b. Check the base station plug
and the 220V plug (remove
and plug-in).
c. Wait until the line is
unoccupied.
d. Use the original connection
cord.
When connect to a PBX, no
and/or wrong connection after
dialing.
Dialing prefix is needed. Insert the dialing prefix
"Searching" is displayed.
Base station out of range.
Base station not connected to
mains.
Reduce the range.
Connect base station to mains.
The call does not work.
Service not activated or wrong
operator or wrong setting
Check your Subscription with
network or change the dial
mode.
No display. Empty battery Recharge battery
Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function! Therefore some of the functions
may be limited when used in PBX systems.
Technical Support
Please read out the serial number of this telephone to Technical Center.
The serial number can be found in the battery compartment after having the batteries
removed.
For technical support, call VTech Customer Service at (852)2667-7433.
10
CONFORMITY
This unit conforms to the following rules and regulations:
1995/5/EC Radio frequency and telecommunication equipment and the mutual acceptance of
conformity.
The CE mark proves the above.
3
TROUBLESHOOTING