VTech VT9041, Руководство пользователя

Страница: 23 / 29

19
2. Press <OK> and <UP/DOWN> to select Auto Answer .
3. Press <OK> and <UP/DOWN> to turn on or off the Auto Answer feature.
4. Press <OK> to confirm.
8.1.8
73
Register an additional handset
You can register up to 5 handsets per base station.
1. Repeat steps 1 to 2 in section
X
8.1.1
X
.
2. Press <OK> and <UP/DOWN> to select Register.
3. Press <OK> and <UP/DOWN> to select the desired base station that you want your
handset to register to.
4. Press <OK> to enter the 4-digit system PIN.
Note: 4-digit PIN is entered in ****. Once 4 digits are entered, the right soft key will become
OK.
5. Press and hold <FIND> on the base station.
6. Press <OK> on the handset to confirm.
Note: “
Registering…” will display. A beep tone is emitted from the handset to indicate
successful registration and the screen returns to idle mode.
If the base is found and the PIN is correct, an unused handset number will be assigned
automatically.
If the PIN is incorrect,
“Incorrect PIN” will display with an error tone and the handset returns
to idle.
If no base is found within a certain period,
“No Base Found” will display with an error tone,
and the handset returns to idle..
8.1.9
74
De-Register a handset
1. Repeat steps 1 to 2 in section
X
8.1.1
X
.
2. Press <OK> and <UP/DOWN> to select De-register.
3. Press <OK> to enter the 4-digit System PIN.
Note: 4-digit PIN is entered in ****. Once 4 digits are entered, the right soft key will become
OK.
4. Press <OK> and <UP/DOWN> to select the handset that you want to de-register.
Note: Only subscribed handsets are listed. The handset currently used cannot be de-
registered.
5. Press <OK> to de-register the handset.
6. Press <YES> to confirm handset de-registration.
7.
“De-registered” will display and go back to idle.
8.1.10
75
Restore the handset to default settings
1. Repeat steps 1 to 2 in section
X
8.1.1
X
.
2. Press <OK> and <UP/DOWN> to select Handset Reset.
3. Press <OK> and <YES> to confirm resetting the handset to default settings.
Note: Phonebook and speed dial entries will not be deleted after handset reset.
8.2
47
Base Settings
8.2.1
76
Set the base ringer
In Idle:
1. Press <Menu> and <UP/DOWN> to select
Settings .
2. Press <OK> and <UP/DOWN> to select Base Settings .
3. Press <OK> and <UP/DOWN> to select Ringer .
4. Press <OK> and <UP/DOWN> to select your desired melody for your base ringer. (A total
of five melodies for base ringer are provided.)
6. Press < OK> and <UP/DOWN> to select your desired ringer volume from
5. Press < OK> and <UP/DOWN> to select Ring volume
Level 1
to
Level 5 or Off .
7. Press <OK> to confirm.