VTech vt2463, Руководство пользователя

Страница: 22 / 39

22
Setting Up Your Answering System
You can set up one feature at a time, or you can set up a feature and
then move on to set up another feature.
1
Make sure the Answering System is ON.
2
Press and release
MENU
until you hear the system announce the
feature you want to set. Refer to the “Feature Summary” below for a
description of the features and your choices.
3
Press
SELECT
to hear and change the setting.
4
Press
TIME SET
to confirm your selection.
Feature Summary
Default settings indicated by
*
.
System announces: Description/directions:
“Set Security Code” Use
SELECT
to choose the remote access code
you will use to access features and functions of the
answering system from a touch tone phone. You can
select any 2-digit code, from 00 to 99.
“Set Day and Time” Press
SELECT
to set the day; then press
TIME/
SET
to confirm your choice and move on to the
hour. Repeat Steps 3 and 4 in “Setting Up Your
Answering System ” above to complete setting
the day and time.
“Set Audible Message Alert” When Message Alert is turned on, the base beeps
Off * once every 10 seconds when new messages
On have been received.
“Set Announce Only” When you turn Announce Only On, callers hear
Off * your announcement, but cannot leave a message.
On
“Set Base Ringer” Turn the base ringer on or off.
On *
Off
“Set Number of Rings” Choose how many times the phone will ring
2 before the system answers a call.
4 * With Toll Saver active, the system answers after two
6 rings when you have new messages and after
Toll Saver four rings when you have no new messages.
ANSWERING SYSTEM OPERATION
AT THE BASE
System announces: Description/directions:
NOTE: You can exit Feature Setup at any time by pressing any MAILBOX button.