VTech Vonage IP 8100-2 Скачать руководство пользователя страница 9

Страница: 9 / 53

Getting Started

Installation Directions

DSL or Cable Modem

INTERNET

Laptop

Base Unit

Handset 1 & 2

WAN Port

STEP 1:

Using the blue Ethernet cable provided, connect one end into the blue port,

labeled “WAN,” located on the back of the IP800 series broadband telephone

base unit and connect the other end into an available LAN port on your router. If

you have a wireless modem router, place the base unit at least 3 feet away from

your router to avoid interference.

Helpful Hint:

If all the Ethernet ports on your existing router are full, disconnect

one of the attached devices from the existing router. Plug the blue Ethernet ca-

ble into the now free port on your router. Connect the device you just unplugged

from your router to the yellow “PC/LAN” port located on the back of IP800 se-

ries broadband telephone base unit.

STEP 2:

Plug the power cord into the power port located on the bottom of your base unit

and the other end into the electrical outlet. This turns the IP800 series broad-

band telephone on.

Warning:

Do not route the Ethernet cable to outdoors, and ensure that you are

using a safety approved DSL or Cable modem with proper electrical isolation.

NOTE:

The IP800 series telephone is expandable up to

a total of 4 handsets. Uses model IP8 (sold separately)

Installatiozn With A Modem Router

Содержание Vonage IP 8100-2






















































Результаты поиска

Содержание Vonage IP 8100-2

Отзывы:

Похожие инструкции для Vonage IP 8100-2

Бренды по названию

Популярные бренды

VTech Vonage IP 8100-2, Руководство пользователя

Результаты поиска

Содержание Vonage IP 8100-2

Отзывы:

Похожие инструкции для Vonage IP 8100-2

Бренды по названию

Популярные бренды