VTech Vonage IP 8100-2 Скачать руководство пользователя

Страница: 2 / 53

Getting Started

Portions of the software associated with this product are open source, and fall

within the scope of the GNU General Public License (GPL). Accordingly, those

portions of code are available to the public, consistent with the requirements of

the GPL, in either source code format or object code format, depending upon

the nature of the code at issue. If you would like to exercise your right to receive

the available code, please send a cashier’s check, payable to VTech Communi-

cations, Inc., in the amount of $0.00 (U.S.$) to:

VTech Communications, Inc.,

9590 SW Gemini Drive, Suite 20

Beaverton OR 97008

ATTN: Information Technology Group / IP800 GPL code request,

along with a written request for the available code. If your request does not fully

comply with the foregoing requirements, VTech reserves the right to reject your

request. Further, by requesting and receiving the available code, you release

VTech, its afﬁliates, and its and their ofﬁcers, directors, employees, and

representatives(“VTech Parties”) from any liability or responsibility relating to

such code, and you acknowledge that the VTech Parties make no representa-

tions with respect to the origin, accuracy, usability, or usefulness of such code,

and the VTech Parties have no responsibility to you whatsoever concerning

the code, including without limitation any responsibility to provide explanation,

support, upgrade, or any communication whatsoever. Your review or use of the

available code is at your sole risk and responsibility.

GPL License Information

Содержание Vonage IP 8100-2






















































Результаты поиска

Содержание Vonage IP 8100-2

Отзывы:

Похожие инструкции для Vonage IP 8100-2

Бренды по названию

Популярные бренды

VTech Vonage IP 8100-2, Руководство пользователя

Результаты поиска

Содержание Vonage IP 8100-2

Отзывы:

Похожие инструкции для Vonage IP 8100-2

Бренды по названию

Популярные бренды