23
Basic Settings
•
User Name:
Enter the user name required by your ISP when you connect to
the Internet.
Note:
you may need to append your ISP’s domain suffix to the username, i.e.,
•
Password:
Enter the password required by your ISP when you connect to
the Internet.
•
Re-type Password:
Re-type the password entered.
•
Maximum Idle Time:
(Default 0) This field specifies the number of minutes
of inactivity before your IP800 series telephone terminates the PPPoE
session. To avoid periodic disconnection from the Internet, leave this value
set to zero.
To allow your computer to disconnect after a period of inactivity, enter the
time in minutes. (For example, enter 0 to disconnect 0 minutes after you’ve
stopped using the computer.)
•
MTU:
(Default 492) Data sent over networks is divided into packets of a
certain size. MTU (Maximum Transfer Unit) specifies the largest packet size
allowed for transmission over a network. This value typically does not need
to be changed. Do not change it unless advised to do so by your Internet
Service Provider.
•
MAC Address:
This defaults to the MAC® (Media Access Control) address
of the WAN port in the IP800 series telephone. If your ISP has registered the
MAC address of your computer, you can manually enter it here, or use the
DHCP Client List to copy it.
•
DHCP Client List:
Lists all MAC addresses of computers that have obtained a
DHCP lease from the IP800 series telephone. If your ISP has registered the
MAC address of your computer, select that MAC address from the list, click
Copy, then click Apply to save the page settings. Clicking Restore takes you
back to the default MAC address value.
Basic Settings
Содержание Vonage IP 8100-2
Страница 53: ...Model IP8100 series telephone ...
