Using the WebUI
60
VDP650 Administrator and Provisioning Manual
where:
host is the hostname or IP address of the server supporting the XML application
port is the port number the phones are using for the HTTP request
At the time of the HTTP call, the variable value field is populated with the appropriate data.
For example, the following URL passes the SIP Account User Identifier to the server:
http://10.50.10.140/script.pl?name=$$SIPUSERNAME$$
A GET request then passes along the following information:
http://10.50.10.140/script.pl?name=42512
Assuming that the User Identifier is 42512.
Variable names are defined by the particular XML application being called.
Variable values are predefined and depend on the status of the phone. If the variable has
no meaning in the current status, then the phone sends an empty string.
The table below lists all possible variable values. Note that variables applicable during an
Incoming or Active Call (such as INCOMINGNAME and REMOTENUMBER) are initialised
at the beginning and at the end of the call.
Variable value
Description
SIPUSERNAME
SIP Account User Identifier
DISPLAYNAME
SIP Account Display Name
LOCALIP
Phone's local IP Address
INCOMINGNAME
Caller ID name of the current Incoming Call
REMOTENUMBER
Remote party phone number (Incoming or Outgoing)
REGISTRATIONSTATE
Registration state available from the Registration event.
Values are:
REGISTERED
DEREGISTERED
FAIL
MAC
The phone's MAC Address
MODEL
The phone's model number: VDP650.
