www.vtechphones.com
42
Answering system operation
2 Press
CHANGE
until you hear the on option
3 Press
SETUP
three times, the system announces
“Announcement. Press
PLAY
or press
RECORD
.
To continue setup, press
SETUP.
”
4 Press
REC/MEMO
The system will announce,
“Record after the tone. Press
STOP
when you are
done.”
Speak toward the
MIC
to record an announcement for up to 90 seconds
5 The elapsed time (in seconds) will be shown in the message window when you record
6 Press
PLAY/STOP
/
when you have finished recording. The system will play back your recorded
message before saving it
Base ringer
Press
SETUP
five times, the system announces
“Base ringer. To change the setting, press
CHANGE.
”
2 Press
CHANGE
to confirm.
3 Press
CHANGE
again to change the setting
4 Press
SETUP
to save your selection and advance to the next setup option, or press
PLAY/STOP
/
to save and exit
Number of rings
This function sets the number of rings before the answering system picks up the call With toll saver
activated, the answering system alerts you to new messages when calling remotely by picking up the
incoming call after two rings When retrieving messages from a location where long distance charges
apply, you may disconnect your call after 3 rings to avoid long distance charges
Press
SETUP
six times, the system announces
“Number of rings. To change the setting, press
CHANGE.
”
2 Press
CHANGE
to confirm the current status, which is also displayed on the message window.
3 Press
CHANGE
to set the number of rings to 2, 4, 6 or toll saver
4 Press
SETUP
to save and advance to the next setup option, or press
PLAY/STOP
/
to save
and exit
