70
Answering machine
10.12 Incoming Call Messages (ICM)
If the answering machine is ON and set for ANSWER & RECORD, when there is an incoming call, the answering machine will answer it and
play the pre-set announcement message, followed by a beep sound. The caller can then leave a message. The caller's voice will also be
played through the loudspeaker to allow you to screen the call and decide if you want to leave the answering machine to record the message,
or if you want to talk to the caller directly.
At any time if you want to pick up the call, you can press
T
or
S
on the handset or press
h
on the base to intercept the call and talk to
the caller directly. The message recording will be stopped automatically. If the answering machine is in the process of recording, the message
already recorded will be saved.
10.13 Answering Machine Settings
10.13.1 Set answer mode
1. Press
MENU
to select ANS. SYSTEM.
2. Press
SELECT
and
<
/
>
to select ANS SYS SETUP
3. Press
SELECT
and
<
/
>
to select ANSWER MODE.
4. Press
SELECT
and
<
/
>
to select ANSWER & RECORD or ANSWER ONLY.
5. Press
OK
to confirm.
10.13.2 Set number of rings to answer
You can set the answer delay to 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER, e.g. if you set the answer delay to 2 RINGS, your
answering machine will answer the call after the caller hearing two rings.
1. Press
MENU
to select ANS. SYSTEM.
2. Press
SELECT
and
<
/
>
to select ANS SYS SETUP.
3. Press
SELECT
and
<
/
>
to select ANSWER DELAY.
4. Press
SELECT
and
<
/
>
to select 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS, and TIME SAVER.
5. Press
OK
to confirm.
Note:
If the Time Saver setting is selected, the answering machine will pick up the call after two rings if there are new messages, and after four rings
if there is no new message.
VTech LS6245_HK version_IFU_EN.book Page 70 Friday, September 3, 2010 4:36 PM
