13
4.2
Glossary of terms
Below are some terms used in this user's manual to help you become familiar with using your Bluetooth devices and your new
VTech LS6245
telephone system.
4.3
Bluetooth at a glance
The telephone base allows you to pair up to four Bluetooth devices. You can have a maximum of two paired devices connected at any time (two
cell phones, or one cell phone and one headset), but only one cell phone or headset can be on a call at a time.
Once you have paired a device with the telephone base, the pairing information is stored on the paired devices list. To use a paired device, it
must be connected and on the active devices list.
Active devices
A maximum of two paired devices (two cell phones, or one cell phone and one headset) on the active devices list
can be connected to the telephone base, but only one cell phone or headset can be on a call at a time.
Bluetooth cell phone
Refers to a Bluetooth enabled cell telephone.
Cell line
The communication service provided through your Bluetooth enabled cell telephone.
Connected
A Bluetooth device (cell phone or headset) can only be used when it is connected to the telephone base. When a
Bluetooth device is connected to the telephone base and active on the active devices list, it is ready for use.
Disconnected
A diagonal line appears across devices 1 and/or 2 when the corresponding Bluetooth device is disconnected from
the telephone base.
Discoverable mode
Before a Bluetooth device can be paired, it must be set in this mode. When pairing your cell phone, the telephone
base is set in this mode. When pairing a headset, the headset must be set in this mode. Depending on the
manufacturer, this mode is sometimes referred to as FIND ME or VISIBILITY.
Home line
Your conventional telephone land line.
Paired devices
Once Bluetooth devices have been paired with the telephone base, they appear on the paired devices list. A
maximum of four devices can be paired with the telephone base, but only two can be on the active devices list.
Pairing
This refers to the process of Bluetooth devices registering device information with each other. The telephone base
must be paired with a Bluetooth enabled cell phone or headset before the Bluetooth device can be used. Depending
on the manufacturer, this is also referred to as BONDING.
PIN
By default, the PIN is
0000
for the telephone base and for most Bluetooth devices. PIN information must be
exchanged between Bluetooth devices before they can be used. This is also known as a PASSKEY or PASSCODE.
VTech LS6245_HK version_IFU_EN.book Page 13 Friday, September 3, 2010 4:36 PM
