VTech LS6185, Краткое руководство пользователя

Страница: 6 / 22

6
Telephone operation
Make a call:
Press , and then dial the telephone number.
Answer a call:
Press , or any dialing key.
-OR-
Pick up the handset from the telephone base when the auto answer
feature is turned on.
End a call:
Press OFF or put the handset back in the telephone base.
Handset speakerphone
During a call, press to switch between the handset speakerphone
and the handset earpiece.
Volume
During a call, press p
/VOLUME
or q
/VOLUME
.
Mute
The mute function allows you to hear the other party but the other party cannot hear you.
During a call, press MUTE . The handset displays Muted .
Press
MUTE
again to resume the conversation. The handset displays
Microphone on
briefly.
Call waiting
When you subscribe to call waiting service from your telephone service provider, you hear an alert
tone if there is an incoming call while you are already on a call.
Press
FLASH
to put the current call on hold and take the new call.
Press FLASH at any time to switch back and forth between calls.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the telephone base/handset ringer
without disconnecting the call. The next call rings normally at the preset volume.
To silence the handset ringer:
Press OFF or MUTE on the handset. displays and Ringer muted displays briefly.
To silence the telephone base ringer:
Press q
/VOL-
on the telephone base.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily
during a call.
During a call, press on the handset.
Use the dialing keys to enter the relevant number. The telephone sends touch-tone signals. It
automatically returns to pulse dialing mode after you end the call.
Find handset
Use this feature to find the system handset.
To start paging:
Press
/FIND HANDSET
at the telephone base. All idle handsets
ring and display Paging .
To end paging:
Press
/FIND HANDSET
at the telephone base.
-OR-
Press , OFF ,
or any dialing key on the handset.
-OR-
Place the cordless handset in the telephone base.
Do not press and hold
/FIND HANDSET
for more than four seconds. It may lead to
handset deregistration.
Redial list
Each handset stores the last 0 telephone numbers dialed. When there are already 0 entries, the
oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list:
Press REDIAL when the handset is not in use.
Press q , p or
REDIAL
repeatedly until the desired entry displays.
Press
or
to dial.
To delete a redial entry:
When the desired redial entry displays, press
DELETE
.
•
•
•
•
•
•
.
2.
•
•
•
•
.
2.
•
•
•
•
•
.
2.
3.