6
Operating range
This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even
so, this handset and telephone base can communicate over only a certain distance - which can vary with the locations of the
telephone base and handset, the weather, and the layout of your home or office.
When the handset is out of range, the handset displays
Out of range or no pwr at base
.
If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press
. Move closer to the telephone base, then press
to answer the call.
If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move
closer to the telephone base.
ECO mode
This power conserving technology reduces power consumption for optimal battery performance. The ECO mode activates
automatically whenever the handset is synchronized with the telephone base.
Energy-saving charging mode
When first purchased and properly installed for charging (see
Battery installation
on page ), put the handset on the handset
charger to charge. The energy-saving charging mode is activated while charging.
When this mode is activated, all telephone functions, except handset battery charging, will be disabled.
If you have registered the handset to the
LS6185
base, follow the instructions below to activate and deactivate the
energy-saving charging mode.
To activate the energy-saving charging mode:
Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries
before proceeding.
While you press and hold /
FIND HANDSET
, plug the telephone base power adapter back to the power outlet.
After about 0 seconds, when the
IN USE
light starts flashing, release
/
FIND HANDSET
and then press it again within
seconds.
When the phone successfully enters the energy-saving charging mode, only the
CHARGE
light on the telephone base
turns on. All handsets alternately show
To register HS...
and
...see manual
.
When the phone fails to enter this mode, repeat Step through Step 3 above.
Note:
The telephone base will be powered up as normal if you fail to press
/FIND HANDSET
within seconds in Step 3.
To deactivate the energy-saving charging mode:
Unplug the telephone base power adapter from the power outlet, then plug it back in. Then the telephone base is powered
up as normal.
Register your handsets back to the telephone base. See page 3 for handset registration instructions.
Maintenance
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not
install the telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when
using electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a dry non-abrasive cloth.
Do not use dampened cloth or cleaning solvents of any kind.
About cordless telephones
Privacy:
The same features that make a cordless telephone convenient create some limitations. Telephone calls are
transmitted between the telephone base and the cordless handset by radio waves, so there is a possibility that the cordless
telephone conversations could be intercepted by radio receiving equipment within range of the cordless handset. For this
reason, you should not think of cordless telephone conversations as being as private as those on corded telephones.
Electrical power:
The telephone base of this cordless telephone must be connected to a working electrical outlet. The
electrical outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone
base is unplugged, switched off or if the electrical power is interrupted.
Potential TV interference:
Some cordless telephones operate at frequencies that may cause interference to televisions
and VCRs. To minimize or prevent such interference, do not place the telephone base of the cordless telephone near or on
top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR often
reduces or eliminates the interference.
Rechargeable batteries:
Exercise care in handling batteries in order not to create a short circuit with conducting material
such as rings, bracelets and keys. The battery or conductor may overheat and cause harm. Observe proper polarity
between the battery and the battery charger.
Nickel-metal hydride rechargeable batteries:
Dispose of these batteries in a safe manner. Do not burn or puncture the
battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
.
.
3.
.
.
•
•
•
•
•
Remember that electrical appliances can cause serious injury if used when you are wet or standing in water. If the telephone
base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE
CORD FROM THE WALL. Then remove the telephone by the unplugged cords.
