
3
Add and register a handset
You can add new handsets (purchased separately) to your telephone system. Each handset must
be registered with the telephone base before use. When first purchased and properly charged,
each expansion handset alternately displays
To register HS...
and
...see manual
. The new
handset should be charged without interruption for at least 30 minutes before registering it to the
telephone base.
To register a handset:
Press and hold
/FIND HANDSET
at the telephone base for about
four seconds until the
IN USE
light turns on.
Press
on the cordless handset. Then it shows
Registering...
The cordless handset show
Registered
and you hear a beep when
the registration process completes. The registration process takes
about 60 seconds to complete.
Deregister handsets
If you want to replace a handset or reassign the designated handset number of a registered
handset, you must deregister all handsets and then register each handset individually.
To deregister all handsets:
Press and hold
/FIND HANDSET
at the telephone base for about 0 seconds until the
IN USE
light flashes.
Immediately press
/FIND HANDSET
again.
You hear a confirmation tone.
All handsets alternately show
To register HS...
and
...see manual
when the deregistration
process completes. The deregistration process takes about 0 seconds to complete.
.
.
.
.
3.
Battery charging
Once you have installed the battery, the screen indicates the battery status (see the table below).
For best performance, keep the handset in the telephone base or charger when not in use. The
battery is fully charged after hours of continuous charging.
Battery indicators
Battery status
Action
The screen is blank, or
displays
Put in charger
and
flashes.
The battery has no or very
little charge. The handset
cannot be used.
Charge without interruption
(at least 30 minutes).
The screen displays
Low battery
and
flashes.
The battery has enough charge
to be used for a short time.
Charge without interruption
(about 30 minutes).
The screen displays
HANDSET X
.
The battery is charged.
To keep the battery charged,
place it in the telephone base or
charger when not in use.