VTech Kidizoom Princess Digital Camera, Руководство пользователя, Страница: 6 / 19

6
GeTTING sTaRTeD
BaTTeRy INsTaLLaTION
Note
: Adult assembly is required
for battery installation.
• Make sure the camera is turned
OFF
.
• Locate the battery covers on the
bottom of the camera. Loosen the screws using a cross-head screwdriver
and remove the battery covers.
• Install 4 new “AA” batteries (2 on each side) as illustrated above. (the use
of new alkaline batteries is recommended for maximum performance.)
• Replace the battery covers and tighten the screws. Do not over-tighten the screws.
Warning
: To avoid damage to any saved data, please do not remove the
batteries while the camera is switched on.
BaTTeRy NOTICe
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision (if
removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium)
• Only batteries of the same or equivalent type as recommended are to be
used;
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number of
power supplies.
• Do not dispose of batteries in fire.
Getting
star
ted/Batter
y
Notice