65
Appendix
Troubleshooting
If you have difficulty operating your IS9181, please try the suggestions below. For Customer
Servce, vst our webste at www.vtechphones.com/IS9181, or call VTech Communcatons at
1 (800) 595-9511.
General
You cannot access any of the features of the IS9181 when t s n standby (dle) mode. Power up
the unt by pressng
STANDBY
.
Reset procedure: Unplug the power cord and remove all batteres (f used) IS9181. Wat
approxmate 30 seconds, then plug the cord back n and re-nstall the batteres (f used).
When powered by batteres and the IS9181 goes nto standby mode, the IS9181 automatcally
shuts down and the screen turns black after one mnute to save battery power (power save
mode). To wake the IS9181 from power save mode, press
STANDBY
.
After pressng the
STANDBY
key, you cannot de-actvate the IS9181 by mmedately pressng
the
STANDBY
key agan. Wat at least 3 seconds between key presses.
Networking
Your wreless network name and password MUST match what you enter n the IS9181. Check
that they are entered exactly the same (ncludng captalzaton and specal characters).
If the SSID Broadcast s turned OFF on certan brands of wreless routers, the IS9181 wll not be
able to connect durng setup. Refer to your wreless router user’s manual for nstructons to turn
ON the SSID Broadcast durng the IS9181 wreless network setup process. Once the IS9181
successfully connects to your wreless router, the SSID Broadcast can be turned OFF agan.
•
•
•
•
•
•