13
Basic Operation
Handset Operation
Making Calls
•
Press ON (or, SPEAKER to use the handset speaker-
phone feature). Dial the phone number.
-OR-
•
Dial the phone number first; then press ON (or
SPEAKER).
•
Press OFF to end your call.
Answering Calls
•
Press ON, SPEAKER or any dialing keys.
•
Press OFF to end your call.
If the handset is in idle mode during an incoming call,
the ringer can be temporarily muted by pressing OFF
or MUTE, or by adjusting the ringer volume using the
volume keys. If the ringing is muted completely (by
pressing OFF or MUTE, or adjusted to ringer level 0
using the volume keys), the ringer mute icon will turn
on indicating the ringing is being muted.
This feature is useful when you need to lower or stop
the ringing quickly without actually answering the call.
For example, someone is sleeping in the room and
you want to check the caller ID before answering, or
you want to ignore just the current call.
This adjustment is temporary, and only last for the
current ringing call. The ringer volume will return to it's normal setting once the
call is answered or when the ringing stops.
Adjust the Handset Volume
(also applies to the handset speakerphone
and headset)
•
The volume control is on the left edge of the handset. During a call, press VOL-
UME
or
keys to adjust the listening volume to a comfortable level. When
you reach the maximum or minimum setting, a double-beep will sound.
Flash Function
•
You can use your IP 8100-2/8100-3 with ser-
vices such as call waiting. When you receive a
call waiting signal, simply press the ON/FLASH
key to switch to the new call. Press ON/FLASH
again to switch back to the original call.
Redial Function
•
Press REDIAL/PAUSE to display the last telephone number dialed from the hand-
set (up to 32 digits). Use
or
to scroll through the five previously dialed
numbers. When the beginning or the end of the redial list is reached, a double beep
will sound.
•
When the desired number is reached, press ON or SPEAKER to dial.
•
Pressing OFF will exit the redial review list.
NOTE: When the redial memory is empty, and REDIAL is pressed, a double beep will sound.
REDIAL
595-9511
Содержание IP8100-2/81003
Страница 1: ......
