9
Connecting to phone line
Plug one end of the telephone line cord into the jack on the back of the Base Unit.
IMPORTANT:
Setup
Getting S
tarted
VTECH TELECOMMUNICATIONS LTD.
DC 9V 600mA
CLASS 2 POWER SOURCE ONLY
CORDLESS TELEPHONE
VTech Customer Service 1-800-595-9511
www.vtechphones.com
TEL
LINE
HAC FCC ID: EW780-5348-00
Checking for dial tone
After the battery is charged, press ON on the Handset. The LCD displays ACTIVE
and shows a call timer. and you will hear dial tone. If not, see In Case of Difficulty.
Tone/Pulse selection
Your phone is preset for tone dialing. See Handset Settings for details.
CAUTION: Use only the VTech power supply provided with your telephone.
Plug the other end of this cord into the wall jack.
FOR MAXIMUM PERFORMANCE OF
YOUR CORDLESS TELEPHONE SYSTEM:
1. Choose a central location for your Base
Unit.
2. Install your Base Unit and Extension
Handsets way from electronic equipment,
such as personal computers, television
sets and microwave ovens.
3. In locations where there are multiple
cordless telephones, separate Base
Units as much as possible.
4. Install your telephone equipment away
from heat sources and sunlight.
5. Avoid excessive moisture, dust or ex-
treme cold.
