27
Basic Operation
Handset Settings
Handset Name
It is possible to give each Handset its own unique
name. The name is shown in the first line during
idle replacing the “VTECH”, normally shown when
the Handset is idle.
The name can be a maximum of 16 characters in
length.
The Handset naming procedure is as follows:
1) Press SEL
2) Press the
or
keys until the HANDSET
NAME option is shown as follows:
3) Press SEL, to enter the Handset name sub-menu.
4) Enter Handset name (characters are entered in
the same way as for the phone book)5) Press
SEL, to confirm the setting.
When returning to idle the display shows:
Handset Name (preset as ‘VTECH’)
• From the idle (OFF) mode, press SEL then
or
key to HANDSET NAME.
• Press SEL again. The display will show the
current setting, for example:
• Press DEL to backspace then ‘spell’ the de-
sired name.
NOTE: The characters are entered in the same
way as for the phone book, see the table in page
27.
• Press SEL to confirm the setting.
