VTech Innotab 3, Руководство пользователя

Страница: 26 / 40

22
NOTE
: Do not disconnect
InnoTab
®
3 Baby
or the computer while files are
downloading. After you have finished, turn off the tablet to save power.
When not connected to a computer, please close the USB port cover
on the
InnoTab
®
3 Baby for safety.
Care & Maintenance
1. Keep InnoTab
®
3 Baby out of direct sunlight and away from direct sources
of heat.
2. Remove the batteries when not using it for an extended period of time.
3. Avoid dropping it. NEVER try to dismantle it.
4. Always keep your
InnoTab
®
3 Baby
away from water.
5. Please examine the toy transformer periodically for conditions that may result
in the risk of fire, electric shock, or injury to persons (such as damage to the
output cord, blades, housing, or other parts) and that, in an event of such
conditions, the transformer should not be used until properly repaired.
Using the InnoTab
®
3
Baby
touch screen and stylus:
• Use only enough pressure to operate the game. Too much pressure may
damage the touch screen.
• Do not use the stylus if it is broken.
• Do not use any other type of stylus on the touch screen other than the
InnoTab
®
3 Baby stylus.
• Put the stylus back in the stylus holder when not in use.
Cleaning the InnoTab
®
3
Baby
touch screen
• Slightly dampen a soft, lint-free cloth with a little water and wipe the screen
to loosen dirt.
• Using a clean and dry cloth, wipe the screen dry. Repeat these two steps as
needed.
• Pay attention to the small gap around the edge of the LCD screen. Do not
allow any small particles to fall into it.
• If you find small particles in this gap, use a toothpick to gently remove them.
CarE
& MaiNTENaNCE