
21
You can use this deskset handsfree when you register a DECT 6.0 cordless
headset (
IS6100
, purchased separately) to the deskset. You can only register
one cordless headset to the deskset. Make sure the headset is charged before
use. Refer to the user’s manual of the cordless headset for details.
Place the headset in the headset charger and note the color of the button.
If the button flashes in blue and red alternately, the headset is unregistered.
If the button shows a constant red light (charging) or a constant blue light (fully
charged), the headset is registered to other deivce. Deregister the headset
before you register it to the deskset. See the deregistration instructions in the
user’s manual of the telephone to which it is currently registered.
To register an IS6100 cordless headset to your UP406 deskset
NOTE:
Register each cordless handset or headset separately.
1. Place the headset in the headset charger and allow
it to charge for at least five minutes before beginning
registration. Make sure the headset is out of the
headset charger before you begin registration.
2. On the UP406 deskset, press
MENU
/SELECT
.
3. Press or to scroll to
Registration
and press
MENU/
SELECT
or
/SKIP
.
4. Press or to scroll to
DECT Headset
, then
press
MENU/
SELECT
or
/SKIP
. The UP406 deskset
shows
Registering DECT Headset... (Put DECT
headset in charger)
It takes up to 60 seconds to
complete the registration.
5. Place the headset into the cradle. The UP406
deskset shows
DECT Headset registered
when the
registration is successful.
6. Lift the headset, then press on the headset. If you hear a dial tone,
the registration was successful.
If there is no dial tone, or the light on the headset flashes blue and red
alternately, the registration was not successful. Remove the headset from
the headset charger. Wait for about two minutes, then repeat the registration
process again, starting with Step 2 above.
Getting started
Adding and registering a cordless headset
Registering
DECT Headset...
(Put DECT headset
in charger)
One Touch
Phone Settings
System setup
>Registration
Registration
Handset
>DECT Headset
Deregistration