
20
You can add a new handset (
UP407
, purchased separately) to your deskset. The
cordless handset must be registered with the UP406 deskset before use. When first
purchased, the expansion handset shows
Choose Handset in Registration at
base menu. And put handset on cradle to register.
Make sure the cordless handset is properly installed before you begin registration.
Refer to the user’s manual of the cordless handset for details. If the handset does
not have enough power to proceed with the registration, you need to charge the
new handset for at least five minutes.
To register an UP407 cordless handset to your UP406 deskset
NOTE:
Register each cordless handset or headset separately.
1. Make sure the cordless handset is out of the
charger and the screen shows
Choose Handset in
Registration at base menu. And put handset on
cradle to register.
2. On the UP406 deskset, press
MENU
/SELECT.
3. Press or to scroll to
Registration
and press
MENU/
SELECT
or
/SKIP
.
4. Press
MENU/
SELECT
again or press
/SKIP
to select
Handset
. The deskset screen shows
Registering
handset... (Put handset on cradle to start)
.
5. Place the unregistered cordless handset into the
charger. The handset screen displays
Registering...
Please wait
. The handset beeps once and begins
registering to the UP406 deskset. It takes up to
60
seconds
to complete the registration. When the
registration is successful, the UP406 deskset shows
Handset registered
and then the handset shows
Ext Handset
.
6. Lift the handset, then press the desired line key (
LINE 1
-
LINE 4
). If you hear
a dial tone, the registration was successful.
If the registration is not successful, the UP406 deskset returns to the previous
screen. To reset the handset, remove the handset from the cradle. Wait for about
two minutes, then try the registration process again.
Getting started
Adding and registering a cordless handset
One Touch
Phone Settings
System setup
>Registration
Registration
>Handset
DECT Headset
Deregistration
Registering
handset...
(Put handset on
cradle to start)