7
4. SETTING UP YOUR RANGE
EXTENDER
Before installing the Range Extender, you need to activate the Range
Extender mode on your telephone system and then register the Range
Extender to the telephone base.
4.1 Automatic Registration
The Range Extender seeks out the telephone base and automatically
registers to that base.
To register the Range Extender automatically:
Move the Range Extender close to the telephone base.
Make sure the Range Extender is powered off (i.e., the AC power
adaptor is not connected).
Set the telephone base into registration mode.
Use the AC adaptor to connect the Range Extender to a mains
socket. The Range Extender will register to the telephone base
automatically.
NOTES
If the LED continues to flash in red, try registering the Range
Extender again.
Use ONLY the power adaptor that comes with your Range Extender.
A different power adaptor may cause an electrical hazard or damage
to the Range Extender.
The Range Extender is now registered to this telephone base and is
ready to use.
You can safely disconnect the power and move the Range Extender
to the selected location, the Range Extender will stay registered to the
telephone base.
1.
2.
3.
4.
1.
2.
