Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants
to the holder of a valid proof of purchase
(“Consumer” or “you”) that the Product and
all accessories provided in the sales package
(“Product”) are free from defects in material
and workmanship, pursuant to the following
terms and conditions, when installed and used
normally and in accordance with the Product
operating instructions. This limited warranty
extends only to the Consumer for Products
purchased and used in the United States of
America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules, or
equipment. Repair or replacement of the Product,
at VTech’s option, is your exclusive remedy.
VTech will return the repaired or replacement
Products to you in working condition. You
should expect the repair or replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends
for ONE (1) YEAR from the date of purchase. If
VTech repairs or replaces a Materially Defective
Product under the terms of this limited warranty,
this limited warranty also applies to the repaired
or replacement Product for a period of either
(a) 90 days from the date the repaired or
replacement Product is shipped to you or (b) the
time remaining on the original one-year warranty;
whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or
other liquid intrusion; or
Product that has been damaged due
to repair, alteration or modification by
anyone other than an authorized service
representative of VTech; or
1.
2.
Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna
systems; or
Product to the extent that the problem is
caused by use with non-VTech accessories;
or
Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible; or
Product purchased, used, serviced, or
shipped for repair from outside the United
States of America or Canada, or used
for commercial or institutional purposes
(including but not limited to Products used for
rental purposes); or
Product returned without a valid proof of
purchase (see item 2 on the next page); or
Charges for installation or set up, adjustment
of customer controls, and installation or repair
of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the United States
of America, please visit our website at
www.vtechphones.com
or call
1 (800) 595-
9511
. In Canada, go to
www.vtechcanada.com
or dial
1 (800) 267-7377
.
NOTE: Before calling for service, please review
the user’s manual - a check of the Product’s
controls and features may save you a service call.
Except as provided by applicable law, you
assume the risk of loss or damage during
transit and transportation and are responsible
for delivery or handling charges incurred in the
transport of the Product(s) to the service location.
VTech will return repaired or replaced Product
under this limited warranty. Transportation,
delivery or handling charges are prepaid.
VTech assumes no risk for damage or loss of
the Product in transit. If the Product failure is
not covered by this limited warranty, or proof of
purchase does not meet the terms of this limited
warranty, VTech will notify you and will request
that you authorize the cost of repair prior to any
further repair activity. You must pay for the cost
of repair and return shipping costs for the repair
of Products that are not covered by this limited
warranty.
3.
4.
5.
6.
7.
8.
What must you return with the Product to get
warranty service?
Return the entire original package and
contents including the Product to the VTech
service location along with a description of
the malfunction or difficulty; and
Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech.
It supersedes all other written or oral
communications related to this Product. VTech
provides no other warranties for this Product.
The warranty exclusively describes all of VTech’s
responsibilities regarding the Product. There are
no other express warranties. No one is authorized
to make modifications to this limited warranty and
you should not rely on any such modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including
those of fitness for a particular purpose and
merchantability (an unwritten warranty that the
Product is fit for ordinary use) are limited to one
year from the date of purchase. Some states/
provinces do not allow limitations on how long
an implied warranty lasts, so the above limitation
may not apply to you. In no event shall VTech
be liable for any indirect, special, incidental,
consequential, or similar damages (including, but
not limited to lost profits or revenue, inability to
use the Product or other associated equipment,
the cost of substitute equipment, and claims
by third parties) resulting from the use of this
Product. Some states/provinces do not allow
the exclusion or limitation of incidental or
consequential damages, so the above limitation
or exclusion may not apply to you.
Please retain your original sales receipt
as proof of purchase.
1.
2.
3.
Technical specifications
Frequency
control
Crystal controlled PLL synthesizer
Transmit
freuency
1921.536-1928.448 MHz
Channels
5
Nominal
effective
range
Maximum power allowed by FCC and
IC. Actual operating range may vary
according to environment conditions
at the time of use.
Power
requirements
Handset: 2.4V Ni-MH battery
Charger: 6V DC @ 400mA
Memory
Phonebook:
50 memory locations; up to 30 digits
and 15 characters
Caller ID log:
30 memory locations; up to 24 digits
and 15 characters
Call block: 20 entries
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found
to comply with the requirements for a Class
B digital device under Part 15 of the Federal
Communications Commission (FCC) rules.
These requirements are intended to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation. Privacy of
communications may not be ensured when using
this telephone.
To ensure safety of users, the FCC has
established criteria for the amount of radio
frequency energy that can be safely absorbed
by a user or bystander according to the intended
usage of the product. This product has been
tested and found to comply with the FCC criteria.
The handset may be safely held against the ear
of the user. The telephone base shall be installed
and used such that parts of the user’s body other
than the hands are maintained at a distance of
approximately 20 cm
(8 inches) or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
•
•
•
•
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC
rules and with technical requirements adopted
by the Administrative Council for Terminal
Attachments (ACTA). The label on the back
or bottom of this equipment contains, among
other things, a product identifier in the format
US:AAAEQ##TXXXX. This identifier must be
provided to your telephone service provider upon
request.
The plug and jack used to connect this equipment
to premises wiring and the telephone network must
comply with applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant
telephone cord and modular plug is provided with
this product. It is designed to be connected to a
compatible modular jack that is also compliant. An
RJ11 jack should normally be used for connecting
to a single line and an RJ14 jack for two lines. See
the installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used
to determine how many devices you may connect
to your telephone line and still have them ring
when you are called. The REN for this product is
encoded as the 6th and 7th characters following
the US: in the product identifier (e.g., if ## is 03,
the REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less. For
more information, contact your telephone service
provider.
This equipment may not be used with Party
Lines. If you have specially wired alarm dialing
equipment connected to your telephone line,
ensure the connection of this equipment
does not disable your alarm equipment. If you
have questions about what will disable alarm
equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must
be unplugged from the modular jack until the
problem has been corrected. Repairs to this
telephone equipment can only be made by the
manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under
the Limited warranty.
If this equipment is causing harm to the
telephone network, the telephone service
provider may temporarily discontinue your
telephone service. The telephone service
provider is required to notify you before
interrupting service. If advance notice is not
practical, you will be notified as soon as possible.
You will be given the opportunity to correct the
problem and the telephone service provider
is required to inform you of your right to file a
complaint with the FCC. Your telephone service
provider may make changes in its facilities,
equipment, operation, or procedures that could
affect the proper functioning of this product. The
telephone service provider is required to notify
you if such changes are planned.
If this product is equipped with a corded or
cordless handset, it is hearing aid compatible.
If this product has memory dialing locations,
you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these
locations. If you do store or test emergency
numbers, please:
Remain on the line and briefly explain the reason
for the call before hanging up.
Perform such activities in off-peak hours, such as
early morning or late evening.
Industry Canada
This device complies with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Privacy of communications may not be ensured
when using this phone.
The term ‘’IC:‘’ before the certification/
registration number only signifies that the
Industry Canada technical specifications were
met.
The Ringer Equivalence Number (REN) for
this terminal equipment is 0.1. The REN is an
indication of the maximum number of devices
allowed to be connected to a telephone interface.
The termination on an interface may consist of
any combination of devices subject only to the
requirement that the sum of the RENs of all the
devices does not exceed five.
This product meets the applicable Industry
Canada technical specifications.
California Energy Commission
battery charging testing
instructions
This telephone meets the California Energy
Commission (CEC) regulations for energy
consumption. It is not necessary to activate the
energy conserving mode during normal usage,
unless you want to charge the battery only and
disable all telephone functions.
To activate the CEC battery charging
testing mode:
1. Unplug the telephone base power adapter
from the power outlet. Make sure all handsets
are plugged with charged batteries before
proceeding.
2. While you press and hold
FIND HANDSET
, plug
the telephone base power adapter back to the
power outlet.
3. After about 20 seconds, when the
IN USE
light
starts flashing, release
FIND HANDSET
and
then press it again within 2 seconds.
The process takes up to one minute to complete.
When the phone successfully enters the CEC
battery charging testing mode, the
IN USE
light
turns off and all handsets display
To register
HS...
and
...see manual
alternately.
NOTE
When the phone fails to enter this mode, repeat Step
1 through Step 3 above. The telephone base will be
powered up as normal if you fail to press
FIND HANDSET
within 2 seconds in Step 3.
To deactivate the CEC battery charging
testing mode:
1. Unplug the telephone base power adapter from
the power outlet, and then plug it back in. Then
the telephone base is powered up as normal.
2. Place the handset in the telephone base
to register it back. The handset displays
Registering...
.
NOTE
The handset shows
Registered
and you hear a
beep when the registration process completes. The
registration process takes about 90 seconds to
complete.
•
•
For C-UL compliance only
Mesures de sécurité importantes
Afin de réduire les risques d’incendie, de
blessures corporelles ou d’électrocution, suivez
toujours ces mesures préventives de base
lorsque vous utilisez votre téléphone :
Lisez et comprenez bien toutes les
instructions.
Observez toutes les instructions et mises en
garde inscrites sur l’appareil.
Débranchez ce téléphone de la prise murale
avant de le nettoyer. N’utilisez pas de
nettoyeurs liquides ni en aérosol. N’utilisez
qu’un chiffon doux et légèrement humecté.
N’utilisez pas ce produit près de l’eau, tel que
près d’un bain, d’un lavabo, d’un évier de
cuisine, d’un bac de lavage ou d’une piscine,
ou dans un sous-sol humide ou sous la
douche.
Ne déposez pas ce téléphone sur un chariot,
support ou table chancelants. L’appareil
pourrait tomber et ètre sérieusement
endommagé.
Évitez d’installer le système téléphonique
dans les endroits soumis è une température
extrème, è la lumière directe du soleil ou è
proximité immédiate d’autres appareils
électriques ou électroniques. Protégez votre
téléphone contre les sources d’humidité, la
poussière, les vapeurs et les liquides corrosifs.
Le boîtier de l’appareil est doté de fentes et
d’ouvertures d’aération situées è l’arrière ou
en dessous. Afin d’empècher la surchauffe,
ces ouvertures ne doivent pas ètre obstruées
en plaçant l’appareil sur un lit, divan, tapis
ou autre surface similaires. Ne placez pas
cet appareil è proximité d’un élément de
chauffage ni d’une plinthe électrique. De plus,
ne l’installez pas dans une unité murale ou un
cabinet fermé qui ne possède pas d’aération
adéquate.
Ne faites fonctionner cet appareil qu’avec le
type d’alimentation indiqué sur les étiquettes
de l’appareil. Si vous ne connaissez pas le
voltage de votre maison, consultez votre
marchand ou votre fournisseur d’électricité.
Ne déposez rien sur le cordon d’alimentation.
Installez cet appareil dans un endroit
sécuritaire, lè oè personne ne pourra trébucher
sur la ligne d’alimentation ni le cordon
téléphonique modulaire.
N’insérez jamais d’objets è travers les fentes et
ouvertures de cet appareil, car ils pourraient
toucher è des points de tension dangereux ou
court-circuiter des pièces, ce qui constituerait
un risque d’incendie ou d’électrocution.
N’échappez pas de liquides dans l’appareil.
Afin de réduire les risques d’électrocution,
ne démontez pas l’appareil, mais apportez-le
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
plutôt è un centre de service qualifié s’il doit
ètre réparé. En enlevant le couvercle, vous
vous exposez è des tensions dangereuses
ou autres dangers similaires. Un remontage
inadéquat peut ètre è l’origine d’une
électrocution lors d’une utilisation ultérieure
de l’appareil. Débranchez l’appareil avant de
procéder au nettoyage. Utilisez un chiffon
humide et doux.
Ne surchargez pas les prises de courant et
les rallonges.
Débranchez cet appareil de la prise
de courant et communiquez avec le
département de service è la clientèle de
VTech dans les cas suivants:
Lorsque le cordon d’alimentation est
endommagé ou écorché.
Si du liquide a été échappé dans
l’appareil.
Si l’appareil a été exposé è une source
d’humidité telle que la pluie ou l’eau.
Si le produit ne fonctionne pas
normalement en respectant les
instructions de fonctionnement.
Réglez uniquement les commandes
indiquées dans le les instructions de
fonctionnement. Les réglages incorrects
des autres commandes pourraient
provoquer un dommage qui pourrait
exiger un travail exhaustif de la part d’un
technicien autorisé afin de rétablir le
fonctionnement normal de l’appareil.
Si le produit a été échappé et que le
socle et/ou le combiné a été endommagé.
Si le produit affiche une nette diminution
de sa performance.
14. Évitez d’utiliser un téléphone (autre qu’un
sans fil) pendant un orage. Les éclairs
peuvent ètre è l’origine d’une électrocution.
15. N’utilisez pas le téléphone pour rapporter
une fuite de gaz è proximité de la fuite. En
certaines circonstances, une flammèche
pourrait ètre provoquée lorsque l’adaptateur
est branché è une prise de courant, ou
lorsque le combiné est déposé sur le socle.
Ceci est un événement commun associé è la
fermeture d’un circuit électrique. L’utilisateur
ne devrait pas brancher le téléphone è une
prise de courant, et ne devrait pas déposer le
combiné chargé sur le socle, si le téléphone
se trouve è proximité d’un endroit comportant
des concentrations de gaz inflammables,
è moins que la ventilation soit adéquate.
Une flammèche dans un tel endroit pourrait
provoquer un incendie ou une explosion. De
tels environnements peuvent comprendre:
des endroits oè l’on utilise de l’oxygène
médical sans ventilation adéquate; des gaz
industriels (dissolvants de nettoyage, des
vapeurs d’essence, etc.); une fuite de gaz
naturel, etc.
12.
13.
•
•
•
•
•
•
•
16. Ne placez que le combiné de votre téléphone
près de votre oreille lorsqu’en mode de
conversation.
17. Ces adaptateurs ont été conçus pour ètre
orientés en position verticale ou montés au
sol. Les broches ne sont pas conçues pour
maintenir l’adaptateur en place si celui-ci est
barnché dans une prise au plafond ou sous
une table/ armoire.
CONSERVEZ CES INSTRUCTIONS
Pile
MISE EN GARDE : N’utilisez que la pile
incluse.
Ne jetez pas la pile au feu. Vérifiez les
instructions spécifiques de mise aux rebus
aupr
è
s des autorités locales.
N’ouvrez pas et ne mutilez pas la pile.
L’électrolyte qui s’en échapperait est corrosif
et pourrait causer des brèlures ou des
blessures aux yeux ou è la peau. L’électrolyte
est toxique si avalé.
Soyez prudents lorsque vous manipulez les
piles afin d’éviter les courts-circuits provoqués
par des matériaux conducteurs.
Rechargez la pile incluse avec cet appareil,
selon les instructions et limites spécifiées dans
ce guide d’utilisation.
Stimulateurs cardiaques implantés dans
l’organisme
Les simulateurs cardiaques (s’applique
uniquement aux téléphones numériques sans fil):
L’organisme ‘Wireless Technology Research, LLC
(WTR)’, une firme de recherche indépendante,
a mené une évaluation pluridisciplinaire des
interférences entre les téléphones sans fil
portatifs et les stimulateurs cardiaques implantés
dans l’organisme. Appuyée par l’Administration
des aliments et drogues (FDA) des États-Unis, la
firme WTR recommande aux médecins:
Avis aux détenteurs de stimulateurs
cardiaques
Ils doivent tenir le téléphone sans fil è une
distance d’au moins six pouces du stimulateur
cardiaque.
Ils ne doivent PAS placer le téléphone sans fil
directement sur le stimulateur cardiaque, tel
que dans une poche de chemise, lorsque celui-
ci est en marche.
Ils doivent utiliser le téléphone sans fil en
l’appuyant sur l’oreille qui se trouve dans la
direction opposée au stimulateur cardiaque.
L’étude effectuée par l’organisme WRS n’a
pas identifié de risque pour les détenteurs de
simulateurs cardiaques causés par les gens qui
utilisent un téléphone sans fil è proximité de ceux-ci.
•
•
•
•
•
•
•
•
À
propos des téléphones sans fil
Alimentation électrique:
Les mèmes
caractéristiques qui constituent des avantages
pour les téléphones sans fil affichent également
des restrictions. Les appels téléphoniques
sont transmis entre le combiné sans fil et
le socle par le biais d’ondes radio ; il y a
donc la possibilité que vos conversations
téléphoniques sans fil soient interceptées par
des équipements de réception radio se trouvant
dans la portée du combiné sans fil. Pour
cette raison, vous ne devez pas percevoir les
communications téléphoniques sans fil comme
étant aussi confidentielles.
Alimentation électrique:
Le socle de ce
téléphone sans fil doit ètre branché è une prise
électrique fonctionnelle. La prise électrique
ne doit pas ètre contrôlée par un interrupteur
mural. Les appels ne pourront pas ètre
effectués du combiné sans fil si le socle
est débranché ou mis hors tension ou si le
courant est coupé.
Possibilité d’interférences aux téléviseurs:
Certains téléphones sans fil fonctionnent
sur des fréquences pouvant causer des
interférences aux téléviseurs et aux
magnétoscopes. Pour réduire ou prévenir de
telles interférences, ne placez pas le socle du
téléphone sans fil près ou sur un téléviseur ou
magnétoscope. S’il y a présence de parasites,
il est conseillé d’éloigner le téléphone sans
fil du téléviseur ou du magnétoscope afin de
réduire possiblement les interférences.
Piles rechargeables:
Manipulez les piles
avec soin afin de ne pas les court-circuiter
avec des bagues, bracelets ou clés. Les piles
ou le conducteur peut surchauffer et causer
des blessures. Respectez la polarité adéquate
entre la pile et le chargeur.
Les bloc-piles rechargeables
à
l’hydrure
métallique de nickel:
Jetez ces blocs-piles
de manière écologique et sécuritaire. Ne les
incinérez pas et ne les percez pas. Tel que
les autres piles de ce type, elles pourraient
dégager une matière toxique qui peut causer
des blessures corporelles si elles sont brèlées
ou percées.
•
•
•
•
•
Specifications are subject to change without notice.
© 2016 VTech Communications, Inc.
All rights reserved. 04/16. DS6072_CIB_V1.0
Document order number: 91-010028-010-100
