11
Find handset
Use this feature to find the system handset.
To start paging:
• Press
/FIND HANDSET
on the
telephone base when not in use.
All idle handsets ring and display
** Paging **
.
To end paging:
• Press
/FIND HANDSET
at the
telephone base.
-OR-
• Press
or any of the dialing keys on
the handset.
NOTES
• Press
MUTE
to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold
/FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays
To register HS
and
See manual
,
refer to the
Register a handset
section to
register the handset back to the telephone
base.
Redial list
Each handset stores the last five telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already five entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly
until the desired entry displays.
Dial a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly
until the desired entry displays.
3. Press
to dial.
-OR-
1. Press
when the handset is not in
use.
2. Press
REDIAL
and then press
q
,
p
or
REDIAL
repeatedly until the desired
entry displays.
3. Press
SELECT
to dial.
Delete a redial list entry
1. Press
REDIAL
when the handset is not
in use.
2. Press
q
,
p
or
REDIAL
repeatedly to
browse to the desired entry.
3. Press
DELETE
to delete the displayed
number. You hear a confirmation tone.