VTech 35885401 series Скачать руководство пользователя страница 16

Страница: 16 / 16

Technical Reference Booklet

Flash Update Procedure

A program AWDFLASH.EXE is included in the utility diskette. The user is recommended

to follow the procedure below to update the flash BIOS.
1. Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained or

downloaded) and the utility program AWDFLASH.EXE to the diskette.

2. Allow the PC system to boot from the DOS diskette.
3. At the DOS prompt, key in

AWDFLASH

and hit <ENTER>

4. Enter the file name of the new BIOS.
5. The question: Do you want to save file? is displayed.

Key in N if there is no need to save the existing BIOS content..
Key in Y if a backup copy of the existing BIOS is needed.

(A file name has to be assigned to the existing BIOS binary file.)

6. The question : Are you sure to program? is displayed.

Key in Y

7. Wait until the flash-update is completed.
8. Power down the PC system.
9. Restart the PC.

ENTER PASSWORD:

Type the password, up to eight characters in length, and press<Enter>. The new password

will clear the previously entered password from the CMOS memory. You will be asked

to confirm the password. Type the password again and press <Enter>. You may also

press <Esc> to abort the selection and operate without a password.
To disable a password, just press <Enter> when you are prompted to enter the password.

A message will be displayed to confirm that the password is disabled.

PASSWORD DISABLED.

Once the password is disabled, the system will reset and you can enter the Setup

Program freely.
When a password is enabled, you will be prompted to enter it every time you try to enter

setup. This prevents an unauthorized person from changing any setting of your system

configuration.
In addition, when a password is enabled, you can require the BIOS to request a password

every time your system is rebooted. This would further prevent unauthorized use of your

computer.
The password requirement is defined by the Security Option of the BIOS Features Setup

Menu. If the Security Option is set to System, the password will be required both at

resetting and at entering setup. If the option is set to Setup, the prompt only appears

when you try to enter setup.

91-8854-10

Содержание 35885401 series

















Результаты поиска

Содержание 35885401 series

Отзывы:

Похожие инструкции для 35885401 series

Бренды по названию

Популярные бренды

VTech 35885401 series, Руководство пользователя

Результаты поиска

Содержание 35885401 series

Отзывы:

Похожие инструкции для 35885401 series

Бренды по названию

Популярные бренды