VTech 35885401 series Скачать руководство пользователя страница 11

Страница: 11 / 16

BIOS SETUP

This chapter discusses Awards Setup Program built into the ROM BIOS. The

Setup Program allows users to modify the basic system configuration. This

special information is then stored in battery-backed RAM, which retains the

setup information when the power is turned off.

Starting Setup

The Award BIOS is immediately activated when you turn on the computer. The

BIOS reads the system information contained in the CMOS and begins the

process of checking out the system and configuring it. When it finishes, the

BIOS will seek an operating system on one of the disks and then launch and

turn control over to the operating system .
While the BIOS is in control, the Setup Program can be activated :
1. By pressing <Del> immediately after switching the system on, or

2. By pressing the <Del> key when the following message appears briefly at

the bottom of the screen during the POST (Power On Self Test )

Press DEL to enter SETUP

If the message disappears before you can respond and you still wish to enter

Setup, restart the system to try again by turning it OFF then ON or pressing the

RESET button on the system case. You may also restart by simultaneously

pressing the <Ctrl>, <Alt>, and <Delete> keys . If you do not press the keys at

the correct time and the system does not reset, an error message will be

displayed and you will again be asked to ...

PRESS F1 TO CONTINUE, DEL TO ENTER SETUP

Getting Help

Press F1 to pop up a small help window that describes the appropriate keys to

use and the possible selections for the highlighted item. To exit the Help

Window press <Esc> or the F1 key again.

In Case of Problems

If, after making and saving system changes with the Setup Program, you

discover that your computer does not reset, use the Award BIOS defaults to

override the CMOS settings.

Main Menu

Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear

on the screen. The Main Menu allows you to select from various setup functions

and two exit choices. Use the arrow keys to select among the items and press

<Enter> to accept and enter the sub-menu.

BIOS Setup

Содержание 35885401 series

















Результаты поиска

Содержание 35885401 series

Отзывы:

Похожие инструкции для 35885401 series

Бренды по названию

Популярные бренды

VTech 35885401 series, Руководство пользователя

Результаты поиска

Содержание 35885401 series

Отзывы:

Похожие инструкции для 35885401 series

Бренды по названию

Популярные бренды