VTdrive FWI-SS3 Series, Руководство пользователя

Страница: 10 / 16

Code
Codes Name
Setting
Range
Factory
Default
Explanation
PP
PU
This code is used
to set the” rated
current-of Motor”
Rated
value
Prohibition
“The rated current of motor”
is the same as the current
nominal current of motor
This code is used
to set the “motor
under-load
protection”
Refer to the details in Item 5.5
Note:
●
F7 the "Max working current”, it is based on the nominal current of motor.
●
If you have no operation for 2 Minutes after you come into the
"set" state, you will return from "set" state.
●
You can not set any parameters in the process of starting or stopping.
●
If you press the "Yes" key to start the soft starter, you can make the
parameters setting(except PJ) to f
5.3 The Function of "Programmable Relay Output"
This function has two kinds of operation way, those are programmable
time sequence output and programmable state output.
●
When the PJ is set as 0-4(or 10-14), the programmable operation way
is time sequence output, As the following form:
actory default.
If need programmable relay output time-delay, the delay time is set
by P4 code.
●
When the PJ is set as 5-9(or 15-19), the programmable operation way
is time sequence output, As the following form:
●
The way of programmable state output is used to show the working
state of soft state, and under this way, the P4 code is invalid,The factory
default value of PJ code is "7"showing the ready state of soft starter and
at this time the motor can be started up, when the programmable output
is in fault state, the faults m
> >
mean the fault of motor, such as fault of
Err05, Err06, Err12, Err15,and they are different of the terminals
⑤⑥
output fault.
●
When PJ
＞
9,the reset state of programmable output is normal closed ,
that is” inverse phase output"
5.4 The Function of Re-start
When the PE item is not set as "0", the automatic re-start function is in
use. This function is affective only the external control connection is 2-
wire way and is not controlled by the PD item (External Control allowed).
When it is 2-wire way you can:
●
Having got electricity and delay time for 60 seconds, the soft starter
will re-start automatically.
VTdrive VTdrive
www.vtdrive.com www.vtdrive.com
17 18