Propiedad de Vendwatch Telematics - Con
fi
dencial
CONNECTING THE T313 TELEMETRY WITH A NORMALLY CLOSED (NC) DOOR SWITCH
Following the results of the test above, cut the wire connected to the “NC” pole of switch.
1.
Locate the RED Wire in the Door Switch Cable of the T313 Telemetry and splice it with the wire still
connected to the switch using one of the UY2 connector.
2.
Locate the ORANGE Wire in the Door Switch Cable of the T313 Telemetry and splice it with the other side of
the previously cut wire using one of the UY2 connector. This wire is now connected to the VMC controller.
