MOUNTING STEP 7 -
COUNTERTOP PLACEMENT
Place the CenterPointe countertop back in the desired location
and line up the pilot holes on the countertop to the corner block
expansion holes that were previously drilled.
MOUNTING STEP 8 -
FASTENING COUNTERTOP
On the underside of the sub-top cabinet base, place the washer on
the screw and drive the screw into the expansion holes in the sub-top
and pilot hole in the CenterPointe countertop. Be careful not to over
tighten.
This concludes the CenterPointe butcher block countertop standard installation process.
COUNTERTOP
CORNER BLOCK
BASE CABINET
3/8” Expansion Hole
#10 Washer
#10 Wood Screw
5/32” Pilot Hole
Have Questions? Contact our Technical Service Team at 1-800-827-10345
All VT CenterPointe products are backed by VT’s 90-day limited warranty.
Warranty is void if the surface is not sanded and sealed or finished.
Learn more at v t i n d u s t r i e s . c o m
©2021 VT Industries, Inc. All rights reserved.
All trademarks and registered trademarks are the property of their respective owners.
RESIDENTIAL WOOD DOORS
RESIDENTIAL WOOD DOORS
RESIDENTIAL WOOD DOORS
VT CUSTOMER SERVICE
525 N. 16TH STREET
SAC CITY, IA 50583
P. 712.662.4177 - 888.287.8356 F. 712.368.4188
MOUNTING STEP 6 -
EXPANSION HOLES
Use a 3/8” drill bit to create an expansion hole in the corner
block cabinet base in the same location as the pilot holes in step
4, repeat for each fastener. This will enlarge the pilot holes in the
sub-top created with the 5/32” bit. DO NOT enlarge the pilot
holes in the CenterPointe countertop.
NOTE: This allows the countertop to expand and contract
after installation.
Drill 3/8”
Expansion Hole
