BGPS-4SI User Guide
© BGPS DVR January 2009
Rev B.
January 2009
Specifications and content are subject to change without notice.
22
DHCP
Enables/Disables DHCP connection (Dynamic IP address)
IP
Static IP address
GATEWAY
Gateway IP address
SUBNET MASK
Network Subnet Mask address
DNS
DNS server IP address. Valid DNS address is needed for E-mail
transmission and use of DDNS.
DDNS
Domain name for the DDNS server. DDNS is used to resolve dynamic IP
address by assigning a host name to replace the IP address for the
connection.
Send E-mail
Setting this value to “ON” initiates e-mail transmission as follows through
the designated email server. Set to “ON”, and press SEL button to BEGIN
e-mail configuration.
For use with DHCP (Dynamic IP) servers.
On : “ALARM EVENT”
Off : alarm = alarm event : capture JPG file and emails
Alarm Event
If an event occurs, the DVR sends an email to a specified recipient with a
JPG file of the event.
Mail Address
Input the designated recipient’s address.
Mail Server Name
Enter the name of your SMTP server.
ID
Enter your SMTP server user ID.
Password
Enter your SMTP server password.
Return Address
Warning
: Some incoming e-mail servers block e-mail reception from
unverified return e-mail addresses. Enter a valid e-mail address associated
with the passwords above.
3-7-1. Ports
Port-Forwarding for Access from a WAN
When one or more DVRs are connected through a IP sharing device (i.e. router) to a larger network (i.e. the
internet), in order to access each unit from outside the local area network, each device must have a unique
RTSP (Real Time Stream Protocol) and HTTP port number. You must also configure your IP sharing
device for port-forwarding, so that each port, when accessed on the IP sharing device, will forward to the
appropriate DVR’s IP and or MAC address. The port number is listed next to the “Port” menu option in the
Network menu
.
If you only plan to access multiple units from within a local area network, you do not need to change
the RTSP and HTTP port numbers, unless other IP sharing devices are established in-between the
client and the DVRs.
To access the DVR, you must have the following information:
