background image

   IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are 
present, basic safety instructions should always be followed, 
including the following:
Polythene bags over product or package may be dangerous. To 
avoid danger of suffocation, keep this wrapper away from babies 
and children. This bag is not a toy.

DANGER:

 Unplug unit when not in use. All appliances are electrically 

live even when switched off. 

WARNING

: This appliance must not be taken  

into a bathroom. 
•  Do not immerse in water or other liquids. 
•  Do not use in the bath, or near basins or other vessels containing 

water.

•  Do not reach for an appliance that has fallen into water. Unplug 

immediately.

•   Take care to avoid contact between the moving blades of the unit 

and the skin, paying particular attention to the face, neck and 
hands. 

•   This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have been given 
supervision or instruction concerning use of the appliance by a 
person responsible for their safety.

•  Children should be supervised to ensure that they do not play 

with the appliance. 

•  IMPORTANT: 

Always unplug the appliance when not in use or 

before cleaning. Do not leave unattended when plugged in or 
switched on. Do not place on any heat sensitive surface and always 
allow to cool before storing away.

•  Do not use any attachments other than those supplied by Conair 

Australia Pty Ltd. 

•  Do not use the appliance with damaged or broken attachment 

combs or with any teeth missing from the blades, as injury may 
occur.

•  Use this appliance only for its intended use as described within 

this instruction booklet.

•  This appliance is not intended for commercial use. 
• Never drop or insert any object into any opening.
•  Ensure appliance is switched off before plugging it into the 

power outlet.

• Do not place appliance on any surface while it is operating.
•  Do not use outdoors or operate where aerosol (spray) products 

are being used or where oxygen is being administered. 

•  Keep the cord away from heated surfaces.
•  Do not use this appliance if the supply cord is damaged. In the 

event of damage, discontinue use immediately and contact 
your dealer for instructions on returning it for examination or 
exchange.

•  After use do not wrap the cord around the appliance as in time 

this may cause the cord to fracture. Coil cord loosely by the side 
of the appliance in storage.

•  Always ensure that the voltage to be used corresponds to the 

voltage marked on the unit.

•  For additional protection, the installation of a residual current 

device (RCD) with a rated operating current not exceeding 30mA 
is advisable in the electrical current circuit supplying the bathroom. 
Ask your installer for advice.

VS7930A_NEW5.indd   2-3

VS7930A_NEW5.indd   2-3

10/17/08   12:51:08 PM

10/17/08   12:51:08 PM

Содержание I-CLIP AUTOMATIC VS7930A










Отзывы: