TERR
Used to select pages within one of the page groups. Press
this knob momentarily to display the on-screen cursor. The
cursor allows the pilot to enter data and/or make a selection
from a list of options. When entering data, the small right
knob is used to select the desired letter or number and the
large right knob is used to move to the next character space.
The small right knob is also used to move the target pointer
up (turn clockwise) or down (counterclockwise) when the
map panning function is active.
Allows the pilot to create a three-dimensional profile which
provides guidance to a final (target) altitude at a specified
location
Allows the pilot to select and remove
approaches, departures, and arrivals from the flight plan.
When using a flight plan, available procedures for the
departure and/or arrival airport are offered automatically.
Otherwise, the pilot may select the desired airport, then
the desired procedure
PROC
13
Used to select page groups: NAV,WPT, AUX, or NRST. With
the on-screen cursor enabled, the large right knob allows the
pilot to move the cursor about the page. The large right knob
is also used to move the target pointer right (turn clockwise)
or left (counterclockwise) when the map panning function is
active.
User programmable
