VQ Radio Control Model P-39 Q/N AIRACOBRA, Инструкция по сборке

Страница: 9 / 12

Slide the Horizontal stabilizer into the fuselage. When you are satisfied with the alignment,
use a pencil to carefully trace around the left and right of the Horizontal stabilizer where them
meet the fuselage. Note, it is important not to disturb the alignment of the stabilizer.
Remove the Horizontal stabilizer from the fuselage,
cut away the covering inside the lines . Not to cut into the wood.
A = A’
B = B’
A A’
90
O
90
O
B
B’
When you are satisfied with the alignment,
use a pencil to trace around the top and
bottom of the stabilizer where it meets the
fuselage.
Cut away
only the
covering
both sides
18- HORIZONTAL STABILIZER
Cut away only
the covering both
sides
B=B’
B B’
Reposition the stabilizers into the fuselage, ensuring that they are accurately aligned.
Secure the horizontal stabilizer in place using thin CA glue.
CA
CA
Glue inside the slot, where
the horizontal stabilizer
meet the fuselage.
Glue the top and bottom of
the horizontal stabilizer,
where it meets the fuselage
Note: use the thin CA glue only
CA
Glue the left and right of the
vertical stabilizer, where it
meets the fuselage
CA
Glue the bottom of the vertical
stabilizer, where it sit on the
fuselage.
When you are satisfied with the alignment, use a pencil to carefully trace around the left and right of the Vertical stabilizer where it
meets the fuselage. Note, it is important not to disturb the alignment of the stabilizer.
Remove the vertical stabilizer from the fuselage. Cut away the covering inside the lines. Not to cut into the wood.
Reposition the stabilizers onto the fuselage, ensuring that they are accurately aligned.
Secure the horizontal stabilizer in place using thin CA glue.
Note: use the thin CA glue only
Insert the Vertical stabilizer into
the slot of the fuselage as shown.
19- VERTICAL STABILIZER