VPK COMPRAG A1108, Руководство пользователя

Страница: 39 / 118

+7 (800) 777-83-75(звонок бесплатный)
www.v-p-k.ru A1108
The compressor is overheating.
There’s insufficient ventilation in
the facility where the compres-
sor is installed.
Increase the air circulation
inside the facility.
The oil level is too low. Top up oil.
The radiator is dirty.
Blow down the radiator with
compressed air.
The safety-relief valve of the
separator tank is activated.
The separator is dirty.
Perform maintenance by replac-
ing the separator.
The pressure is too high (over13
bar).
Set the working pressure below
13 bar.
7. Storage and disposal
7.1 Storage conditions
The compressor should be kept at a temperature between - 20° and +35°С with max. 85%
relative humidity.
7.2. Disposal of oils and process condensate.
Used oils, greasy filters and separators should be recycled in a sealed container and dis-
posed of at a local recycling or disposal facility. Do not allow precipitation to mix with oil.
Process condensate contains oil. Local environmental regulations govern the degree of
contamination of condensate discharge into sewers. Use process condensate separators to
separate oil and further impurities from condensate. Replaceable components of a process
condensate separator should be disposed of in the same way as greasy wiping cloths.