VPG verizon, Быстрый старт

Страница: 5 / 13

3
Rev. 09/01/2021
ENCORE
Installation
click or scan QR code
for installation video
Back to Table of Contents
1 2 3
5 6 4
IMPORTANT: The code must match the
switches inside the IR Keyfob.
Remove the cover of the EnCore
(VP-1397) with the V-T900 security
driver or V-900-T Allen wrench.
Set the security
code by changing
the DIP switch
inside the EnCore.
Clean the fixture
surface. Then,
adhere the EnCore
to the fixture. Hold
in place for 30
seconds.
Plug the
appropriate VPG
accessory sensors
into the Encore.
Remove the 3M
adhesive liner.
V-T900
V-900-T
KF-1102
V-37
KF-1106
VP-1397W
VP-1439W
VP-1349WXL
VP-1350WXL
or
or
or
Switch #8 changes
the sensor LEDs to red.
Reinstall the EnCore cover.
Plug the IR Receiver cable into the
back port of the EnCore.
Thread the sensor cables through the
fixture. Install the sensors to the products.
Point the IR Keyfob at the IR
Reciever and press the red
lock button to arm the EnCore
Plug the V-37 power supply into the
EnCore’s power connector
Tools & Parts Needed
VP-1626
or
or
Adhere the IR dome close
to the edge of the fixture
slot. The IR Receiver will
accept the keyfob’s IR
signal for the EnCore.
VP-1524C