VPG verizon, Быстрый старт

Страница: 8 / 13

6
Rev. 09/01/2021
SLIM WEARABLE SENSOR
Installation
5 6 7
8 9 10
click or scan QR code
for installation video
Back to Table of Contents
Close the Slim Wearable
Sensor onto the top watch
band and tighten with the
security driver.
Remove adhesive liner
and adhere the Flex
Sensor to the back of
the watch head.
Ensure the Flex Sensor will
not be crimped when the
watch is placed on the
display stand or fixture.
Rest the watch on the stand,
and plug the sensor into the
EnCore alarm unit (VP-1397).
IMPORTANT: If the Flex Sensor is damaged
or missing, do NOT plug sensor into EnCore.
For the Apple Watch Cradle,
remove the rubber padding if using
a 42mm Apple Watch or larger.
Apply the circular adhesive to the back of
the watch puck. Thread the watch charging
cable through the watch cradle for the
specified device. Remove adhesive liner and
adhere the charging puck inside the cradle.
Use the appropriate watch cradle for
the product you wish to secure.
Screw the watch cradle to the watch stand
with the security driver
(V-T900).
Insert the provided binding screw into
the watch cradle.
Insert the Flex Sensor
(VP-1636) into the
sensor.
Loosen the screw
on the top of the
Slim Wearable
Sensor (VP-1626)
and remove the
clear shunt plug
on the side of the
sensor.