VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
6
i2 MX FEATURE IDENTIFICATION- ITA
PART # 410 130 116, 410 130 206
Figure B.
ITA frame front view (no backshell)
ALPHA KEYING
RECEPTACLE
NUMERIC
KEYING
RECEPTACLE
TOP
BOTTOM
POLARIZING
FEATURE
POSITION A1
INDICATOR
TIER A
TIER B
INDICATES 5
SLOTS
LOCKING TABS
Figure A.
i2 MX ITA
Figure C.
ITA with backshell, side view
FRONT
MATING
SIDE
REAR
WIRING
SIDE
30
°
CABLE EXIT
KNOB
1.
The front of the i2 MX ITA frame can be identified by locating the keying
receptacles. The numeric keying receptacle should be located at the top and the
alpha keying receptacle at the bottom of the front
(
Figure B
)
. The front also has
a polarizing feature which prevents engagement with the receiver in an incorrect
orientation
(
Figure B
)
. Finally, the front features locking tabs for secure mating
with the receiver(
Figure A
).
2.
Position A1 can be located on the front by the cavity marked in black in the top
right corner
(
Figure B
).
An additional position A1 indicator can be found in the
bottom tier of slots (Tier B) , in the top right corner. The cavities are used to place
pins from the VTAC extraction tool.
3.
The rear side can be identified as the side that the backshell attaches to (
Figure C
).
The rear side is where wire exits the ITA.
4.
Blue and white markings along the slot edges denote slot (insert) count. Each blue
or white marked area indicate 5 slot positions. (
Figure B
).
