VP Networks MultiAP 700G, Руководство пользователя

Страница: 21 / 42

The default value 0 means to disable re-keying.
5.2.5 WPA parameters
The configuration of WPA parameters enables WPA-TKIP or WPA2-AES .
To enable WPA and WPA-PSK, configure WPA-TKIP. To enable WPA2 and WPA2-PSK, configure
WPA2-AES.
When WPA or WPA2 is configured, Radius-based 802.1x authentication with TKIP encryption method is
enabled. Under this configuration, the
Pre-Shared Key option should be disabled.
The security level of this method is known to be very high.
When WPA-PSK or WPA2-PSK is configured, a Pre-Shared Key, or Pass Phrase, is used for data
encryption and authentication. Under this configuration, the
Pre-Shared Key option should be enabled.
Key length must be between 8 and 63 characters (inclusive).
The security level of this method is known to be high.
5.2.6 Access Control
The settings allow administrator to control the access through Mac address filtering.
Available options are: None , Deny all except listed and Accept all except listed .
Enter or Choose MAC address(es) in the box of MAC Insertion Tool on the right, and then click <<<Add
to list . MAC address(es) will be added into the filter.
To delete a selected MAC address in the list, click and highlight a MAC address in the box on the left,
then click
Delete highlighted .
Comment: