VP Networks MultiAP 700G, Руководство пользователя

Страница: 17 / 42

Broadcast SSID is enabled by default.
Multicast Filter
This setting enables the filtering of multicast network traffic to the wireless
SSID. By default, it is set as
enabled .
Multicast Rate
This setting specifies the transmit rate to used for sending multicast network
traffic.
Data Rate
There are two options on data rate: Fixed, Auto
Fixed will forced all data packets to be transmitted into the selected transmit
rate. Auto will automatically select the best transmit rate with a condition to use
the selected transmit rate as the minimum auto transmit rate.
Default Quality of
Service
The 802.1p QoS value to be marked on all outgoing packets generated from the
virtual AP (i.e. packets that travel from the Wi-Fi segment, through the MultiAP
700G unit to Ethernet segment via the LAN port).
If per-user or per-domain QoS value is specified, the Default Quality of Service
value will be overridden.
Possible values are Gold , Silver and Bronze .
DHCP Server Type
This setting selects among the following options:
•
None : DHCP requests will be passed to the Ethernet segment, and will
not be processed by MultiAP 700G.
•
Relay : MultiAP 700G will forward DHCP requests to a specified DHCP
Server. This option prevents broadcast messages from being
propagated on the Ethernet segment. Upon selecting this option, the
DHCP Server IP address will be prompted.
•
Server : MultiAP 700G will allocate and offer IP addresses locally. For
further details, please refer to Section
•
•
DHCP Server
•
Please refer to the following sections, 5.2.1 and 0 for details.
Security Policy
This setting configures the wireless authentication and encryption methods.
Available options are: None , Static WEP , 802.1x and WPA .
Selecting None disables encryption.
For details on the other options, please refer to the following sections:
•
5.2.3 - Static WEP Parameters
•
0 - 802.1x Parameters
•
5.2.5 - WPA Parameters
Maximum
Associated Clients
This setting limits the number of associations allowed to the SSID.
The default value zero would be treated as unlimited .
Access Control
The settings allow administrator to control the access through Mac address
filtering.
Available options are: None , Deny all except listed , Accept all except listed .
For details on the other options, please refer to Section 5.2.6 - Access Control.