VP Networks MultiAP 700G Скачать руководство пользователя страница 10

Страница: 10 / 42

Configuration

5.1 System Settings

General Access Point Settings

AP Name

A user-specified name for the access point.

This value can be retrieved via SNMP.

Location

A user-specified name for the location of the access point.

This value can be retrieved via SNMP.

AP Mode

This option enables the access point running as a

bridge

or a

router

. When

the access point runs as a router, the Management VLAN ID is ignored and
the LAN settings appear for proper network setup.

Domain Name

Domain name can be set for wireless clients to have a readable name for both
web management and captive portal redirection URLs.

Server IP

This specifies the unique IP address for the MultiAP 700G unit to communicate
on the Ethernet segment.

This IP address is distinct from the admin IP address 192.168.0.3 on the
Ethernet segment.

Keep Default IP

is set, the default IP would be available on the system

along with the Server IP setting.

DHCP

is set, the IP address of the MultiAP 700G unit is then acquired from a

DHCP server on the Ethernet segment.

Static IP

is set, it is required to enter the information related to that static IP,

including

Static IP address, Subnet Mask, Default Gateway and DNS

Server

PPPoE

is set, it is required to enter the information related to that PPPoE

connection:

PPPoE Username

PPPoE Password

PPPoE Service Name

This option is only available with

Router

mode.

Management VLAN

This specifies the VLAN from which management sessions are allowed. The
establishment of management sessions is restricted only to the specified
VLAN ID. If

Management VLAN ID

is set to zero, no VLAN restriction is

applied.

The default value of this setting is

zero

. It means no tagging is enabled

(instead of tagged with zero).

This option is only available in

Router

mode.

Timezone

This option specifies the time region to be used for representing the time on
the system.

NTP Server

This is the Network Time Protocol (NTP) Server hostname to be used for
synchronizing system clock of MultiAP 700G.

The default value of this setting is

pool.ntp.org

Содержание MultiAP 700G











































Результаты поиска

Содержание MultiAP 700G

Отзывы:

Бренды по названию

Популярные бренды

VP Networks MultiAP 700G, Руководство пользователя

Результаты поиска

Содержание MultiAP 700G

Отзывы:

Бренды по названию

Популярные бренды