Voyager GT4060, Руководство пользователя

Страница: 4 / 8

Remote control operation time 18 hours
Battery cover
Open the battery cover
Use 6 x AA batteries, alkalines are
suggested. Place battery in to the battery
holder according to the polarity markings.
Batteries not supplied
Alkaline type are
recommended
1.5V
AA sized batteries
6 Required
REMOTE INFORMATION
CHARGING THE LI-PO BATTERY
BATTERY AND USE INFORMATION
Connect the battery to the unit and place
in to the under carraige of the unit.
Move the throttle stick
to the lowest point.
Please remove the battery from the Quadcopter and ensure
the remote control is turned off with batteries remove prior to
storing the units. Or even once you have stopped playing
with the unit.
Ensure the batteries are installed in to the Remote Control and the Quadcopter.
Then before turning the Remote Control on, move the “Throttle Stick” to the lower point as shown above.
Once the “Throttle Stick” is lowered, turn the remote on.
This will pair the Remote Control with the Quadcopter.
NOTE:
It is important that the Quadcopter is on by installing the batteries first before attempting to turn the Remote
Control on. It will not pair otherwise.
POWERING UP AND PAIRING
7.4V 1600mah
LED Indicator
Li Po Battery
Red light flashing Red light off
Charging Complete Charging
Input Charging Current
240V 500mA
Approx. 60 Minutes
Approx. 15 Minutes
N/A