Voyager GT4060, Руководство пользователя

Страница: 3 / 8

Each module have hooks that clip in to the bottom of the Quadcopter.
Clip a module on to the Quadcopter by guiding them through the tabs
as shown in the illustration above.
GT3830 - Camera Module
GT3836 - Retractable Winch Module
GT3834 - Water Sprayer Module
GT3832 - Bubble Blowing Module
*NOTE: All modules shown on this page are sold separately
Module Action 1
Module Action 2
The following are the actions for the available add-on Modules when connected to the Quadcopter.
Button: Module Action 1 (located on the top left of the remote)
- GT3830 Camera Module = Start/Stop Video record
- GT3832 Bubble Blower Module = Creates bubbles
- GT3834 Water Sprayer Module = Shoots water
- GT3836 Retractable Winch = Retracts up
Button: Module Action 2 (located on the bottom right, front side of remote)
- GT3830 Camera Modules = Take snap shot
- GT3836 Retractable Winch = Extend down
ACCESSORIES
PARTS AND ADD-ONS
360° flip button
During flight and while the Quadcopter is hovering stationary, press the top right button as shown above to
preform a 360° flip.
Ensure the Quadcopter is away from obstacles prior to attempting a 360° flip.
360° FLIP AND MODULE CONTOLS